A full spectrum extract keeps everything the plant made, the whole mix of cannabinoids and terpenes, THC included. Broad spectrum keeps that same mix but strips the THC out. Isolate goes the other way entirely: one single cannabinoid, purified down to a powder or crystal, with nothing else along for the ride.
A single cannabis plant can carry more than 100 cannabinoids and dozens of terpenes, and the extraction method decides how many of them make it into the final jar or cartridge. That is why two concentrates off the same shelf, made from the same strain, can look and smell nothing alike. Washington shoppers 21 and over will see all three types on dispensary menus here, and the label plus the certificate of analysis is where the difference shows up in writing.
Table of Contents
Where These Three Labels Came From
Hemp CBD brands coined these three terms first, mainly to tell buyers whether a product carried any THC at all. Washington’s adult-use market borrowed the same vocabulary once extraction gear got precise enough to separate cannabinoids cleanly.
| Type | Cannabinoids | Terpenes | THC | Common form |
|---|---|---|---|---|
| Full spectrum | Full plant range | Full profile | Present | Sauce, badder, carts |
| Broad spectrum | Range minus THC | Most retained | Removed | Tinctures, topicals |
| Isolate | One cannabinoid | None | Only in THC isolate | Crystal, powder, distillate |
Licensed Washington stores run on seed-to-sale tracking, so every jar and cartridge ties back to a tested batch. The lab panel lists cannabinoid percentages and, on plenty of products, a terpene breakdown, which is the quickest way to tell which bucket something belongs in.
All three styles turn up across the menu, from concentrates like live resin and hash rosin to vape carts, tinctures and topicals. A budtender can pull the batch results up if the packaging leaves you guessing.
Full Spectrum Keeps the Whole Plant Profile
A full spectrum extract carries the minor cannabinoids alongside THC and CBD. Rows for CBG, CBN and CBC often show up on the panel, usually in small fractions of a percent.
The terpenes from the original plant stay in too, which is why a live resin cart smells closer to the flower it came from than a plain distillate does. Live resin and live rosin are the two categories most Washington shoppers already know that lean this direction, since both start with fresh-frozen material instead of cured bud.
Both solventless and hydrocarbon runs can land here. The method is not what decides it, the post-processing is. Heat and vacuum steps strip volatile compounds, so a heavily refined hydrocarbon extract ends up narrower than a cold-cure rosin from the same plant.
- Minor cannabinoid rows listed on the panel, not just THC and CBD
- A terpene breakdown printed with named compounds and percentages
- Fresh-frozen input, usually said outright on the jar
- Texture like sauce, badder or cold cure rather than clear oil
Washington labels lead with total THC and total CBD, so the minor cannabinoid row is where the range actually shows. Plenty of our cannabis products list both panels.
Broad Spectrum Drops the THC and Keeps the Rest
Broad spectrum begins life as a full plant extract, then goes through extra processing that pulls the THC back out. Chromatography is the usual route, separating cannabinoids by how they move through a column.
Terpenes and minor cannabinoids generally survive that step, though every added process thins them a little. A broad spectrum tincture rarely tastes as loud as the flower it started from.
Pay attention to how THC is written on the certificate of analysis. Non-detect means below the lab’s detection limit, not a guaranteed absolute zero. Different labs run different thresholds, and the lab that tested the batch is the one that sets it.
- Scan the THC row for ND, LOQ or a number near zero
- Note the test date and the lab name printed on the package
- Compare the terpene list against a full spectrum version of the same brand
- Check whether the product is a tincture or topical, where this style is most common
These sit on Washington shelves inside licensed 21+ stores like anything else, no hemp-shop exception. Anyone with a workplace drug-testing concern should raise it with their employer or their own doctor rather than trusting a line on a box.
Isolate Is One Cannabinoid and Nothing Else
Isolate is refined down to roughly 99% of a single cannabinoid, most often CBD, sometimes THCa or CBG. Everything else gets washed out during the refinement.
What is left looks like powdered sugar or small crystals. No smell, no flavor, no terpenes. Producers like it for that reason: it mixes into a gummy, a beverage or a lotion without changing the taste, and the number on the label stays steady from batch to batch.
The trade-off is real. You get consistency and a neutral flavor, and you give up the surrounding plant compounds entirely.
- Flavored edibles and beverages where plant taste would clash
- Topicals built around a single named cannabinoid
- Products listing one dominant row and no terpene panel at all
Shoppers comparing infused options often find a guide to choosing edibles useful before browsing. Isolate-based products fall under the same Washington rules as everything else on the menu, and a valid government ID showing you are 21 or older is still required at the door.
How to Spot the Difference on a Washington Label
Start with the cannabinoid panel. Several populated minor cannabinoid rows point toward a full plant extract, while one dominant row with blanks or trace readings under it points toward isolate.
Terpene results are the fastest tell of all. Isolate products list none, because there are none to list. A printed terpene breakdown with named compounds means plant material carried through.
Read the product name next. Live resin and live rosin signal one thing, distillate and isolate signal another. Distillate is refined and usually THC-dominant with terpenes added back afterward, which is a different build from an extract that never lost them.
- Count the cannabinoid rows with real numbers in them
- Find the terpene section, or confirm there isn’t one
- Look for live resin, live rosin, distillate or isolate in the name
- Note the producer and the batch test date
The Floyd’s App lets you browse your local menu and curated sections before you drive over, and budtenders at any of the six Washington stores will pull up the panel and walk it with you.
Which Type Fits the Way You Shop
All three labels describe what is in the jar, not what happens after you use it. Two adults can buy the same batch and come away with different impressions, so treat the category as a shopping filter rather than a promise.
Flavor chasers almost always end up on full plant concentrates, because the terpenes that survived processing are the whole point of paying for them. Price tends to follow process, and fresh-frozen input costs more to harvest, freeze and run than cured trim does.
| What matters most to you | Where to look | What you give up |
|---|---|---|
| Loud flavor and aroma | Live resin, live rosin | Higher price per gram |
| Plain taste in an edible | Isolate-based gummies, drinks | Terpenes entirely |
| THC removed | Broad spectrum tinctures | Fewer products to pick from |
You will hear brands use the phrase “entourage effect” on packaging and shelf talkers. Treat it as marketing language, and ask a budtender to pull the lab panel so you can see which compounds actually tested in that batch.
Washington’s testing and labeling requirements get revised, and the WSLCB is the body that sets them, so go by the current rules instead of what a label looked like a few years back. A short read on what full spectrum means on a cartridge label covers the wording you will see at the counter.
Pick Your Category Before You Open the Menu
Decide which of the three you are shopping for before you start browsing, then use that word as your filter instead of scrolling by THC percentage. Once something catches your eye, ask the budtender to pull the cannabinoid and terpene panel for that exact batch and read it with you at the counter. Two minutes of that beats guessing from the front of the box. Bring a valid government ID showing you are 21 or older, since every purchase happens in person or as a local pickup order. Browsing your nearest Floyd’s menu ahead of time on the app makes the counter conversation shorter and sharper.
Full Spectrum, Broad Spectrum And Isolate
Does a full spectrum product lose its terpenes if I leave it sitting around at home?
Yes, slowly. Terpenes are volatile, so heat, light and open air thin them out over weeks and months. Keep concentrates and carts in a cool, dark spot with the lid or cap sealed tight, and off a sunny windowsill or a hot car dash. The cannabinoid numbers on the panel hold up far better than the aroma does.
Why does the same brand sell a full spectrum cart and a distillate cart at different prices?
Processing and batch size set the price. Distillate runs in large volumes and refines down to a clear oil that fills a lot of carts at once, which drops the cost per gram. A full spectrum cart takes colder handling, smaller runs and gentler post-processing to keep the plant compounds intact. The extra steps show up on the price tag.
Can a product be part isolate and part full spectrum at the same time?
Yes, and plenty on the shelf are. A diamonds and sauce jar pairs near-pure crystal with a terpene-rich liquid pulled from the same plant, so one package covers both ends. Some edibles blend isolate for a steady number with a bit of plant extract for aroma. The cannabinoid and terpene panel is where that blend shows up.
Do I need a medical card to buy broad spectrum or isolate products in Washington?
No card is needed. Any adult with a valid government ID showing they are 21 or older can buy broad spectrum or isolate products at a licensed Washington store, same as every other category. All six Floyd’s locations are medical certified and can issue medical cards, and a budtender at the counter can walk you through what that involves.